The Beam Hands-free interface accessory enables the audio for voice communications to be integrated with the aircrafts communication system, enabling the use of standard aircraft headphones to communicate easily in this environment. The Intelligent handset provides for easy dialling as well as the ability to have a private conversation using the handheld if required.

The Iridium Satellite network provides a robust network for supporting a global tracking application, with global coverage from pole to pole and the use of low powered antennas that are omni directional this makes a Beam TrackALERT system your desired installation for any application.

All Beam terminals support all of the Iridium Data services available. This then provides a flexible means by which to communicate using one or more of the following protocols; Circuit Switched Data, Short Message Service, Direct Internet and Short Burst Data.

Whilst all data services are available on any Beam device, selected Beam terminals offer varying voice service features. Any voice supported terminal will allow the use of an Intelligent Handset, however the Beam Remote Satellite Terminal, RST100, allows the use of standard phone equipment through its intelligent RJ11 connectivity. This means that standard cordless, corded or PBX systems can be integrated for voice communications on this terminal.

Whilst all data services are available on any Beam device, selected Beam terminals offer varying voice service features. Any voice supported terminal will allow the use of an Intelligent Handset, however the Beam Remote Satellite Terminal, RST100, allows the use of standard phone equipment through its intelligent RJ11 connectivity. This means that standard cordless, corded or PBX systems can be integrated for voice communications on this terminal.

When using the Hands-free Interface (HFI), included with the RST620 or as an accessory with the other terminals this provides high quality, full duplex, and hands-free voice communications. Other key features of the HFI include; Horn Alert Radio Integration Radio Mute. The intelligent handset can be easily removed from its cradle if a private conversation is required.

The Beam TrackALERT terminals are an intelligent Alert / Tracking and Monitoring unit all in one and are available for all Beam communication terminals. TrackALERT allows the deployment of various applications, including vehicle, asset, and or asset tracking, monitoring and condition reporting as well as remote control and configuration. Alert/Alarm monitoring applications can also be simply deployed.

The TrackALERT interface is highly intelligent and the ability to configure many parameters in the terminal locally or remotely enables a great deal of customization and flexibility.

For detailed information on the Beam TrackALERT terminals see TrackALERT brochure for detailed information.

The Beam terminals support 11-32V DC power input. An AC plug-pack is supplied with all terminals, which therefore makes it very easy to connect to mains or DC power. The use of an RST050 Beam Battery Back-up is also an ideal accessory where communication needs to be guaranteed.

Beam terminals will support the connection of a third party device through the DB9 Data connection, enabling Data Loggers, Meter Readers and other terminal devices to be easily connected to Satellite Communications. Beam terminals generally supports engine management type monitoring devices to enable communication through the satellite network via SMS, SBD or circuit switched data.

Using SMS or SBD with the intelligence built into the Beam RST100 and RST200 terminals it is possible to remotely configure the communication terminal as well, run diagnostic checks, check signal strength, temperature and call logs as well as the ability to have automated reporting for “still alive” reporting if required. It is also possible to perform some simple polling of a device plugged into the Log Port of the terminal. This can be a very cost effective means of low-level position and condition reporting.

Whilst the installation and integration to the terminal is very straight forward, selecting the appropriate antenna and antenna cable for the installation is also important to ensure greatest call quality over the satellite network. There is a range of suitable antenna installation types for various applications. In order to maximize the signal penetration in some locations the antenna can be installed some distances away from the main terminal in a more appropriate location.

The antenna should always have as clear line of sight to the sky as possible, eight degrees above the horizon is always ideal, however the clearer the view to the sky the greater the reliability of service.

The maximum loss for an antenna cable installed to any Iridium device is 3db maximum. Exceeding this loss will affect reliability and call quality.

Communication Terminals Supported

- Remote Satellite Terminal
- Remote Satellite Modem
- Remote Voice/Data Module
- In-vehicle Telephone
- Remote Data Module
- IntelliDOCK for 9505A

TrackALERT GPS Terminals

- TrackALERT-Inbuilt GPS
- TrackALERT-External GPS

Accessories

- Intelligent Handset
- Hands-free Interface
- Battery Backup
- Iridium Antennas
- GPS Antennas
- SSAS/Alarm Accessories

Key Solution Features:

Beam Equipment

- Ability to use standard telephone handsets (RST100 only)
- Robust Intelligent Handsets available
- Intelligent microprocessor on board
- Remote / Local configuration
- GPS input options
- Asset Tracking
- Remote Monitoring
- Alarm/Alert Reporting
- Omni directional antennas
- Full certified C, CE, A Ticks.
- Germanischer Lloyd & American Bureau of Shipping Approved
- Full Environment Certification IEC60945
- Power input options 11-32V DC
- Battery Backup / Solar options available
- Low power requirement

Iridium Service Features

- Low cost mobile to mobile calls
- Supports SMS & SBD
- Internet access at 10 kbps
- High quality voice
- Crew Calling
- 100% global coverage
- Prepaid or post paid service